Weather resistance：Can be usedin outdoor for 5 to 30 years.
Anti-UV: The third-party detection of anti-UV grade can up to level 5.
Shock resistance: Not be brittle when used in outdoor at 40 ℃.
Flame retardancy: Meet the UL-94 of level V0.
Environmental protection: Meets the EU ROHS environmental directive, can up to a REACH standard and does not contain (6P) phthalate and other level according to the customer demands.
Can be customized: Can be customized according to the different requirements of customers.
Product properties parameters
|Physical and mechanical properties||Test Methods||Unit||Standard value (range)|
|Hardness shore D||ASTM D2240||67-80|
|Tensile Strength||ASTM D638||Mpa||30-50|
|Tensile modulus||ASTM D638||Mpa||1700-3300|
|Elongation at break||ASTM D638||%||20-70|
|Vicat softening temperature||ASTM D1525||℃||65-80|
|Izod impact strength(gap)||ASTM D256||J/M||50-90|
Products are widely used in: building materials, automobiles,power grids, photoframe strip,pipe fittings valves, foam profiles and so on.
Product processing guidance
- The head mold is clean and heated
- The temperature is set to the specified temperature, until the temperature reaches the specified temperature, the insulation for a period of time
- Start the machine should be slow, screw speed reached the set value gradually
- Shut down the machine before the material inside the screw net, and then shut down the mold
2、 Processing technology reference
- The product can be processed by vacuum extrusion, cold extrusion, coextrusion, film, bronzing, water transfer, thermal transfer process and so on.
- The Product has many advantages of good mobility, high surface brightness, mold adaptability, good thermal stability, low shrinkage, no precipitation, bronzing film firmly, easy to spray and so on.
- The specific processing needs to be based on formula, mold and product, the processing temperature set as 150-180 ℃ just for a reference.